IOTA, Power converter/charger, DC output 30, DSL-30

$139.00

The DLS-30 Power Converter/Battery Charger from IOTA Engineering converts nominal 120 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 30 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-30 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.


 
SPECIFICATIONS
DC Output Voltage (No Load) approx. 13.6V (DC)
Output Voltage Tolerance (No Load) + or - .7%
Output Amperage, Max Continuous 30 Amps
Output Voltage (Full Load) approx. >13.4V (DC)
Maximum Power Output, Continuous 400 Watts
Ripple and Noise <50 mV rms
Input Voltage Range 108-132V (AC)
Input Voltage Frequency 47-63
Maximum AC Current @ 108VAC 7.3 Amps
Typical Efficiency >80%
Max Inrush Current, Single Cycle 30 Amps
Short Circuit Protection Yes
Overload Protection >100%
Line Regulation 100 mV rms
Load Regulation <1%
Fan Control Proportional
Thermal Protection YES
Working Temperature Range 0 -40C
Storage Temperature -20 to 80C
Withstand Voltage (VDC)* 1700/1700/500
Dimensions 9.7" x 6.7" x 3.4"
Weight 5.0 lbs


Add to Cart:

  • Model: DSL-30
  • Manufactured by: IOTA


Customers who bought this product also purchased...


Copyright © 2005-2010 All Rights Reserved Marksolarsolution.com