Outback FLEXnet DC

$322.00

OutBack FLEXnet DC Multichannel Advanced DC System Monitor

The OutBack Power Systems FLEXnet DC is the ultimate in DC System monitoring devices. Our integrated networked communications make valuable, usable data available from your system, viewable on an OutBack MATE communications device (screens seen below), providing you with the answers you need concerning your system’s health, performance and efficiency.

Battery Status Screen
Easily see your system’s current condition with this at-a-glance display. This screen shows an easy to interpret “fuel gauge” style status bar, current state-of-charge and whether you are currently charging or discharging your batteries. This is useful for those system owners who want a way to quickly understand the current state of their battery bank.

Now Summary Screen
Monitor the amount of power your system is currently producing and consuming as well as the amount of power going IN and OUT of your battery bank. This screen also displays your battery bank’s voltage and current state-of-charge, providing you with real-time production monitoring of DC sources, such as a solar array or small wind turbine, as well as consumption by loads.

Today Summary Screen
Monitor the cumulative energy your system has produced and consumed as well as the total amount of energy that has gone to charging your batteries today. This screen also displays today’s lowest state-of-charge and allows you to see how your overall system production compares to system consumption.

History Summary Screen
Review historical energy production and consumption data for the most recent 128 days, including the minimum battery state-of-charge reached for each day. This screen can be used to watch power system production and consumption trends.

Additional Available Data
Total Battery Amps
Average Battery Amps
Average Battery Volts
DC Amp-Hours IN Per Shunt
DC Amp-Hours OUT Per Shunt
DC kWh IN Per Shunt
DU kWh OUT Per Shunt
Last Cycle Amp Hours
Last Cycle Watt Hours
Last Cycle Amp Hour Charge Factor
Last Cycle Watt Hour Charge Efficiency
Total Number of Day Full
Cumulative Battery Amp Hours Removed
FN-DC Specifications
Battery Voltage Input Range: 8.0 to 80.0 Volts DC
Battery Voltage Resolution: 0.1 Volts DC
Number of Current Channels: One to Three (each can be a Source or Load)
Current Range (Each Channel): -1000.0 Amps to +1000.0 Amps DC
Current Resolution: 0.1 Amps DC
State of Charge Display: 0 to 100% (1% increments)
Aux Relay Configuration: SPST, Magnetic Latching Relay
Aux Relay Max Rating: 5 Amps @ 30 Volts DC
Current Shunt Type (order separately): 500 Amp / 50mv
Primary Display: OutBack Power MATE or MATE2 4 x 20 LCD Secondary Display : Five LED Indicators on front of FLEXnet DC
Battery AH Capacity Range: 100 to 10,000 Amp Hours
Data Logging Memory: Most recent 128 Days
Programmable AUX Relay Settings: Battery Volts Adjustable from 8.0 to 80.0 VDC
State of Charge: Adjustable from 0 to 100%
Time Delay: Adjustable from 0 to 240 Minutes
Accuracy: 0.5% of Reading +/- 2 LSDs per channel
Operating Temperature Range: 0 - 50º C
Mounting: 3/4” Panel Mount Breaker Slot or Surface Mount
Warranty: Standard 2 year

One shunt is required per power source to be measured.
The FW-BBUS is able to connect multiple shunts

Add to Cart:

  • Model: FlexNet DC
  • Manufactured by: Outback


Copyright © 2005-2010 All Rights Reserved Marksolarsolution.com